Difference between revisions of "Shifter55 - Neutrino"

From The Gemology Project
Jump to: navigation, search
m (Shifter55 moved page Neutrino to Shifter55 - Neutrino)
(Revamping page layout)
 
Line 1: Line 1:
Comments and an animated render are available by clicking the "discussion" tab above.
+
Possibly the simplest Triolette that can be cut, with only 12 facets. The main challenge is likely to come from trying to cut anything fairly large in it!
 +
Best in RIs higher than 1.70, and can have a top facet cut after everything is polished to allow a hole to be drilled for setting.
 +
 
 +
This should be suitable for both light and dark material, and if you are up to the challenge I would try it in a large piece of Danburite or twinned Calcite to take advantage of some of the long light paths this has (the dark center in the upwards tilt doesn't window, gemray won't render it properly).
 +
 
 +
If you cut this, please consider posting an image here or messaging me on the forum with a picture of the cut stone.
 +
----
 +
 
  
 
Click on this link to download the .pdf file: [[File:AetherNeutrino.pdf]]
 
Click on this link to download the .pdf file: [[File:AetherNeutrino.pdf]]
 +
 +
== Image Gallery ==
 +
[[Image:Neutrino172.gif|thumb|right|300px|Render in Spinel with 10° head shadow]]
 +
<br clear="left" />
 +
[[Image:Neutrino214.gif|thumb|right|300px|Render in Cubic Zirconia with 10° head shadow]]
 +
<br clear="left" />
  
 
[[Category:Designs by Author]]  
 
[[Category:Designs by Author]]  

Latest revision as of 00:32, 11 January 2020

Possibly the simplest Triolette that can be cut, with only 12 facets. The main challenge is likely to come from trying to cut anything fairly large in it! Best in RIs higher than 1.70, and can have a top facet cut after everything is polished to allow a hole to be drilled for setting.

This should be suitable for both light and dark material, and if you are up to the challenge I would try it in a large piece of Danburite or twinned Calcite to take advantage of some of the long light paths this has (the dark center in the upwards tilt doesn't window, gemray won't render it properly).

If you cut this, please consider posting an image here or messaging me on the forum with a picture of the cut stone.



Click on this link to download the .pdf file: File:AetherNeutrino.pdf

Image Gallery

Render in Spinel with 10° head shadow


Render in Cubic Zirconia with 10° head shadow